SMOK Resa Prince Tank
Featuring a stylish, Cobra Resin design, the SMOK Resa Prince tank boasts a new bulb glass tube that has an impressive 7.5ml capacity. The tank uses the TFV12 Prince cores for maximum flavor and vapor production, with a variety of coil heads available, including the new “Light” editions.
The tank has a 30mm diameter and is 58mm tall, while weighing 58g. It is constructed from resin and stainless steel.
Unlike the TFV12 Prince, the Resa Prince uses a more traditional top cap that screws off, rather than the top swivel cap found on other SMOK tanks.
SMOK Resa Prince Tank Specifications:
- 58mm Height
- 30mm Diameter
- 58g Weight
- 7.5ml Capacity
- Resin and Stainless Steel Construction
- 1x Resa Prince Tank
- 1x V12 Prince-Q4 0.4-ohm Quadruple Coils (pre-installed)
- 1x V12 Prince-X6 0.15-ohm Sextuple Coils
- 1x V12 Prince-T10 Red Light 0.12-ohm Decuple Coils
- 1x Replacement Glass Tube
- 1x User Manual
- Spare Parts
IMPORTANT WARRANTY INFORMATION
DISCLAIMER: RISK OF BATTERY EXPLOSION. USE AT YOUR OWN RISK.
Warning: Never use a short or flat 510 connection on any hybrid or hybrid-style device. If you are not sure whether this pertains to your particular setup, DO NOT assemble and use. Always use proper precautions and handling.
NOTE: Descriptions, specifications, and claims are based on manufacturer information. Information listed and provided are to be used at the sole discretion of the consumer and are not representative of analysis, testing, and verification by TheCloudyVapor and any and all of TheCloudyVapor’s parent and subsidiary companies. There is an intrinsic risk with the use of any and all rechargeable batteries in any situation. TheCloudyVapor and any and all of TheCloudyVapor’s parent and subsidiary companies are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). TheCloudyVapor and any and all of TheCloudyVapor’s parent and subsidiary companies are not responsible for any damage caused by the misuse and/or mishandling of Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable batteries and chargers.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and use special care as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have enough knowledge on all rechargeable batteries before you use them. Always charge batteries in a clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates.
Consuming this product can expose you to Nicotine, which is known to the State of California to cause birth defects or other reproductive harm.
All pictures are based on practicality, copyright reserved.